User's Manual

IntelliTrac P1 Personal Tracker User Guide
Systems & Technology Corp. © 2008
This document contains confidential, restricted, and proprietary information. The document has been prepared for the
exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in
part, without the prior, written consent of an authorized officer of S&T.
- 6 -
 As soon as the cable is connected the pop up windows of “Found New Hardware” appears
and the USB driver for IntelliTrac P1 is installed manually as below illustrations. To make
sure the installation was completed normally, check for the device “xxxx” in “My
Computer” as shown below, or from “Control Panel  System  Hardware Device
Manager”
 Once power on IntelliTrac P1, and connect P1 to PC via USB cable; there will be a pop-up
windows appearing as
 Please simply click which window, “Found new Hardware”, to start Hardware Wizard; and
then choose option of “No, not this time”.
 The Hardware Wizard will move on to next windows as below, please choose option of “Install from
a list or specific location(advance)”.