User's Manual

IntelliTrac P1 Personal Tracker User Guide
Systems & Technology Corp. © 2008
This document contains confidential, restricted, and proprietary information. The document has been prepared for the
exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in
part, without the prior, written consent of an authorized officer of S&T.
- 12 -
(5) Type AT$VERSION command and press [Enter] key, the hardware and firmware version will be shown
on the HyperTerminal. If the HyperTerminal is shown like below, that means connection between the
device and PC is working properly. It is ready to send all configuration commands from now on.