User's Manual

4. Install Immobilizer Relay (Optional)

(1) If the wireless relay terminal is same as car original fuel pump (or ignition, or starter) relay terminal,

please just unplug the car original relay, then plug in the wireless relay.

(2) If the wireless relay terminal is different with car original fuel pump (or ignition, or starter) relay

terminal :

Please plug the wireless relay into the spare relay socket, then

a. Connect the socket Black wire to Ground.

b. Connect the socket Red wire to IGNITION

c. Blue & Green wires are for engine disable cutting (ignition or fuel pump or starter…)

(3) For security reason, it is better do NOT install the wireless relay at IGNITION key lock area. May

install the wireless relay in the hood or near the fuel pump or any confidential place for engine

disable cutting.