Instructions / Assembly

5
B347360414COM0
9 /12
www.systembuild.com
8
8
8
Option 1;
Securely screw (14d) into solid area of the wall as
shown.
Opción 1;
Firmemente el tornillo (14d) en el área sólida de la
pared como mostrado.
L'option 1;
Solidement vis (14d) dans région solide du mur comme
montré.
Option 2:
Drill a 3/16" diameter hole (5mm) in the wallboard. Tap the
wall anchor(14b) into the hole until it is flush. Fasten the wall
bracket (14a) to the wall anchor (14b) with the screw (14d).
Opcion 2:
Taladre un agujero de 3/16" de diámetro (5mm) en la pared.
Golpea la ancla de pared (14b) en el agujero hasta que sea
parejo. Abroche la escuadra de pared (14a) al la ancla de la
pared (14b) con el tornillo (14d).
Option 2:
Percez un trou de 3/16" de diamètre (5 mm) dans le mur.
Enfoncez l'ancrage mural (14b) dans le trou jusqu'à ce qu'il
soit à égalité avec le mur. Fixez le support mural (14a) à
l'ancrage mural (14b) avec la vis (14d).
stud
montante
planche
wallboard
muro
mur
hole
agujero
trou
14b
14c
14a
x
14 1
14d
14b
F
F
F
x
8
12
14d