9979015COM Closet Storage Tower B349979015COM0 Date of Purchase ___ / ___ / ___ Lot Number: Do Not Return This Product! Contact our customer service team for help first. Call: 1-866-452-4081 (toll free) Monday-Friday 9am - 5pm CST Visit: www.systembuild.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Keep your home and family safe with the wall anchor kit that is included with the product.
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-866-452-4081 Monday-Friday 9am - 5pm CST Visit systembuild.com to view the limited warranty valid in the U.S. and Canada. You Tube Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 1 HOUR - Open your item in the area you plan to keep it to avoid excessive heavy lifting. - Identify, sort and count the parts before attempting assembly.
k Quic bly em Ass Tip Before You Start P P P P P Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
Board Identification Not actual size A B C Upper Left End Panel Upper Right End Panel 36860015010 36860015020 E x2 Divider 36860015050 I Upper Fixed Shelf 36860015090 systembuild.
Board Identification Not actual size Q V U Bottom 36860015170 Upper Back Panel K686001500 systembuild.
Board Identification Not actual size These pieces are paperboard construction. They are not made from wood, but are required for the assembly of your unit. G U F H A B I K V F L D E J C E Q F systembuild.
Part List Actual Size 3 2 1 x4 #A80250 Shelf Support x9 #A53510 Angle Bracket x20 #A22620 Cam Lock 8 7 6 x8 #A12700 7/8" Pan Head 11 x8 #A13020 1-1/4" Pan Head systembuild.
Part List Not Actual Size 10a 10c 10d 10b 10 X1 #A84050 Wall Anchor Kit 13 X4 #I20630 Telescoping Tube systembuild.
STEP 1 3 5 10a 10b (x3) #A53510 (x1) #A84050 (x6) #A12120 5 F 3 5 G 10b G 10a F systembuild.
STEP 2 4 8 (x4) #A22610 (4) #A21660 4 A & B 4 8 8 systembuild.
STEP 3 Quick Assembly 8 2 (x4) #A22620 Tip (x4) #A21660 Proper orientation of CAM LOCK 2 8 8 2 2 I 2 8 8 systembuild.
STEP 4 4 3 (x3) #A53510 5 (x4) #A22610 (x6) #A12120 5 3 5 4 4 F K 4 4 systembuild.
STEP 5 UNLOCK LOCK finished edges facing up B I A systembuild.
STEP 6 12 (x8) #A23030 12 12 G B I A 12 12 12 K 12 12 systembuild.
STEP 7 2 (x2) #A22620 Quick 8 4 Assembly Tip (x6) #A22610 (x2) #A21660 Proper orientation of CAM LOCK 4 4 4 2 4 D 4 4 2 8 8 systembuild.
STEP 8 2 (x2) #A22620 Quick 8 4 (x6) #A22610 (x2) #A21660 Assembly Tip Proper orientation of CAM LOCK 4 4 4 2 4 C 4 4 2 8 8 systembuild.
STEP 9 Quick 8 2 Assembly Tip (x8) #A22620 (x8) #A21660 Proper orientation of CAM LOCK 2 8 8 J 2 8 2 8 8 2 2 8 L 2 8 8 systembuild.
STEP 10 8 (x4) #A21660 E 8 8 (x2) systembuild.
STEP 11 3 2 (x3) #A53510 (x4) #A22620 8 5 (x6) #A12120 (x4) #A21660 Quick Assembly Tip Proper orientation of CAM LOCK 5 3 5 2 8 8 F 2 Q 8 2 2 8 systembuild.
STEP 12 12 (x2) #A23030 finished edge E 12 Q 12 systembuild.
STEP 13 12 (x2) #A23030 12 finished edge finished edge L E J 12 systembuild.
STEP 14 L E E J Q systembuild.
STEP 15 UNLOCK LOCK D L E J Q C systembuild.
STEP 16 UNLOCK G LOCK B A I K D L E J C systembuild.
STEP 17 2 people are required for this step. Carefully turn the unit over onto its front side as shown. Assure that the unit is square. Distance from corner to corner must be equal as shown. 7 (x49) #A21110 U 1st 7 B V 2nd D Q Align the upper back panel with the top of the unit. Align the side edges with the edge of the left upper end panel (A) and right upper end panel (B) and nail straight into the back edges as shown.
STEP 18 9 11 13 6 (x8) #A12700 (x8) #A20940 (x8) #A13020 (x4) #I20630 First, locate your closet rods where you would like to position them in-line with the holes in the unit and mark hole locations on the wall. Next, If you are using the anchors to fasten the closet rods, insert them into the wall securely by screwing them into the wall using a screwdriver. Second, use the #A12700 screw to attach your closet rods to your unit as shown on the left side of the unit.
STEP 19 1 (x4) #A80250 1 1 1 systembuild.
STEP 20 10c 10d For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. (x1) #A84050 IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT. hole WARNING Serious or fatal crushing injuries can occur from furniture tipover.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 50 lbs each 22.7 kg each 40 lbs 18.2 kg 50 lbs each 22.7 kg each 20 lbs 9.1 kg Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television. Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc.
Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit systembuild.
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-866-452-4081 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.systembuild.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
Español Página 25 Se necesitan dos personas para realizar este paso. Dé la vuelta a la unidad con cuidado para colocarla de manera frontal como en la imagen. Asegúrese de que la unidad tenga forma cuadrada. Las distancias entre esquinas deben ser iguales. Alinee el panel trasero superior con la parte superior de la unidad. Alinee los bordes laterales con el borde del extremo superior izquierdo panel (A) y panel de extremo superior de la derecha (B) y directamente en los bordes posteriores como se muestra.
Español OPCION 1: Para asegurar en una viga de la pared (método preferido). Use un detector de vigas, localice la viga en la pared. Coloque la unidad contra la pared y alinee con el soporte de seguridad en esta ubicación. Para hacer este proceso más fácil, se puede perforar un agujero piloto de 1/8" de diámetro (3mm) a través del soporte de seguridad hacia la viga en la pared. Atornille el tornillo a través del soporte de seguridad y hacia la viga en la pared.
Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-866-452-4081 (sans frais) du Lundi au Vendredi de 9h à 17h Heure Centrale Visitez: www.systembuild.com ATTENTION Le meuble peut basculer et causer des blessures graves ou la mort.
Français Page 25 Deux personnes sont requises pour cette étape. Pivoter prudemment l'assemblage sur son devant tel que démontré. S'assurer que l'assemblage est égalisé. La distance d'un coin à l'autre doit être équivalente tel que démontré. Aligner le panneau arrière supérieur au dessus de l'appareil. Aligner les bords latéraux avec le bord du panneau d'extrémité supérieure gauche (A) et panneau d'extrémité supérieure droite (B) et clouer directement des rebords arrières comme indiqué.
Français OPTION 1: Fixation sur un montant mural (méthode préférée) En utilisant un détecteur de montants, locaiiséune planche dans le mur. Placez votre appareil contre le mur, avec le support de sécurité aligné à cet endroit. Pour rendre la conduite de la vis plus facile, vous pouvez percer un trou pilote de 1/8" de diamètre (3 mm) à travers le support de sécurité dans la planche. Conduisez la vis à travers le support de sécurité dans le montant du mur.
