User's Manual

②. Type ‘1’ to change a stop bit to 2 bits..
■ Example of Parity bit setting (None -> Even)
①. Type ‘P’.
②. Type ‘2’ to change to even parity.
3) RF Connection setting
This is necessary only if you communicate with other manufacturer’s Bluetooth devices instead of the WCS-232
or change the initial settings.
■ Example of Target Address setting
(00:00:00:00:00:00 -> 00:02:78:01:EF:BC)
①. Type ‘A’.
②. Type the target address to be changed. You have to enter the 12-digit hexadecimal address. After typing
“00027801EFBC”, press ‘Enter’ key.
■ Example of connection mode setting (WAIT COMMAND -> WAIT)
①. First, enter ‘M’ to display the way to use the requested command. To set the connection mode at Wait mode,
the input value shall be ‘0’.