User's Manual

⑥. Set up serial port.
⑦. Setup RF connection.
⑧. After completing the setting, be sure to execute ‘X’ command and save, and then the Mode Switch to ‘Active’.
■ Reference:
If you enter ‘?’, the list for all commands is displayed, and if ‘?<command>’, how to use the requested command
is displayed. All commands should be typed with capital letter. All commands and setting values are case-
sensitive.
2) Serial settings
■ Example of Baud Rate setting (9600 bps -> 19200 bps)
① Type ‘B’.
Software version
Authentication
Adapter address
Factory default setting
Target adapter address
Device name
COM port setting