User's Guide

31
Figure 3-8 Signal Strength Test
The signal strength test shows LInkQuality and RSSI values. The closer LinkQuality is to 255 and RSSI
is to 0, this means the WCS-232 has a good connection to the connected Bluetooth device. In general,
the wireless connectivity is at its best within 10 meters. You can push the STOP button at anytime in
order to terminate the signal strength test. The signal strength test will continue until the STOP button
is pushed. If you close the WCSConfig Window without pushing the STOP button, you must restart
WCS-232 to terminate the test.
Connection(in) icon will show the following window, which enables the WCS-232 to wait for a connection
from another Bluetooth device. If the waiting time is set to 0, WCS-232 will continually wait for connection
until [Cancel] button is clicked.