User's Guide

28
When the WCSConfig software is able to access the WCS-232 properly, the icons in the left side window
come will become available for use.
In device configuration window, hardware reset can be executed or operation mode and RS232 can be
configured as well. Security option also can be configured in this window.
Figure 3-6 Device Setting Window
WCS-232 supports two security options, Authentication and Encryption. If you enable the Authentication
option, you must also enter a Pin Code value. If the authentication is enabled, the connection, between
the Master and Slave device must share the same Pin Code. In case that WCS-232 connects to another
Bluetooth device, that requires authentication, you must know the other device’s Pin Code. In general,
most Bluetooth devices have a pincode of 1234 or 0000. If you check Encryption option, the WCS-232
will encrypt packets and sent to the device. The Encryption options works well in case that only one of
the devices between Master and Slave use the Encryption option.