User's Guide

3.10. Software and Utility

This configuration software and utility for firmware update is included with the product, which also can

be downloaded from

http://www.sysbas.com.

Table 3-9 Configuration Software

Software

Purpose

Operating System

WCSConfig

Configuration

MS Windows 98SE or Higher

3.11. WCSConfig

WCSConfig is a program that runs on Microsoft Windows for the configuration of WCS-232. Install

WCSConfig on your computer. Plug a WCS-232 into the serial port of the computer and turn on the

power. Run WCSConfig.

Figure 3-2 Serial Port Setting

Set each option properly and click [Confirm]. If the settings of the WCS-232 are different from the

WCSConfig, an error message will pop up. If the WCS-232 is in the status of connection, warning

message will pop up. Then the current connection can be cancelled by [Disconnect] button on the main

window.