User's Guide

14
2.2. Connecting the Hardware
This section describes how to connect the WCS-232 to the serial device.
- Connect a power source to the WCS-232.
- Connect the WCS-232 to a serial device.
2.2.1. Connecting Power to WCS-232
WCS-232 can be powered from either external DC power adaptor/external power source. To power the
WCS-232 from the external DC power adaptor or external power source, connect the power jack to the
power connector of the WCS-232 using the DC power adapter, USB power cable or DC power cable
that is included in the package. If power is properly supplied, the [Mode] lamp will display a green color.
Figure 2-2 Connecting Power to WCS-232