WCS-232_v6.0_User Manual_Eng_DM v1.0.1

WCS-232 v6.0 User Manual
64
2
-8
3
-4
4
0
5
4
6
8
7
12
8
16
C.31. S59: Current Slave in Communication (default 0)
Stores the slave number currently communicating in node switching mode. It is automatically saved when
communicating with the slave and you can modify this value when you want to communicate with a particular slave
immediately after the master reboot. Input values range from 0 to 4. Value 0 means an initial state that has never
been connected and communicated with any slave. At this time, it communicates with the first connected slave.
C.32. S60: Reconnect Time Interval (default 5)
Sets the time interval for reconnecting attempt when the slave is disconnected during multi connection
communication. Units are seconds and it attempts to connect every two times the actual input value. Input value is
at least 5. If you set the input value to 5, it performs a reconnection attempt every 10 seconds after the slave
disconnection. It also performs automatic reconnection only when the master is set to Mode 1.