WCS-232_v6.0_User Manual_Eng_DM v1.0.1

WCS-232 v6.0 User Manual
62
the setting value of the master).
C.19. S43: COD (default: 001F00)
Means the type of Bluetooth device and can be changed.
C.20. S44: COD Filter (default: 0)
Filters the type of Bluetooth device when searching for peripherals. If set to 0, it searches for all devices. If set to
3E0100, only search Bluetooth device with COD value of 3E0100.
C.21. S45: Inquiry Access Code (default: 0x9E8B33)
The default IAC value of all Bluetooth devices is 0x9E8B33. Only devices matching this value can be searched. For
example, if you set this value to 9E8B10, only Bluetooth devices with the Inquiry Access Code set to 9E8B10. The
IAC value can be entered from 0x9E8B00 to 0x9E8B3F.
C.22. S46: BD Address of Last Connected Device
Stores the address of the Bluetooth device that was last connected in single connection mode.
Stores the address of the Bluetooth device that was last connected to TASK1 in multi connection mode.
C.23. S48: Low Power Max Interval (default: 5000)
Max interval value to be used in low power mode. The unit is 625 μsec (5000 x 0.625 = 3125 msec).
C.24. S49: Low Power Min Interval (default: 4500)
Min interval value to be used in low power mode. The unit is 625 μsec. (4500 x 0.625 = 2812 msec)
Reducing interval increases power consumption and increasing takes more time to wake up from low power mode.