WCS-232_v6.0_User Manual_Eng_DM v1.0.1

WCS-232 v6.0 User Manual
60
C.9. S14: Enable DTR Transfer (default: 1)
S14=0, use DTR/DSR signal as loop-back.
S14=1, send DTR signal to the remote DSR.
C.10. S15: Enable Disconnect by DTR (default: 0)
S15=0 connection cannot be deleted
S15=1 Bluetooth connection can be disconnected when DTR signal is off
Disconnect the WCS-232 using the DTR signal. If the DTR signal is turned off when set to 1, the Bluetooth connection
will be disconnected.
C.11. S22: Faster Connection (default: 0)
S22=0, none
S22=1, page scan
S22=2, inquiry scan
S22=3, page/inquiry scan
Access time is increased by an average of 1.5 seconds.
C.12. S23: Intercharacter Timeout Setting (default: 0)
S23=0, Not used
S23=1: 1 x S26
S23=2: 10 x S26
S23=3: 100 x S26
C.13. S24: Maximum Number of Inquiry Result (default: 15)
The maximum number of Bluetooth devices that can be found when performing a search function. If set to 0, no limits
on number.