WCS-232_v6.0_User Manual_Eng_DM v1.0.1

WCS-232 v6.0 User Manual
53
Response
 OK
 0,255,0,0 (repeatedly) (0, LinkQuality, 0, RSSI)
Function
Test sensitivity
Parameter
n=0: Stop sensitivity test
n=1: Start sensitivity test
Description
Use in command standby mode by Escape sequence character such as +++ after the
Bluetooth connection has been established. The closer the LinkQuality is to 255, the closer
the RSSI is to 0, the better the sensitivity.
Example
+++
AT+BTRSSI,1
 OK
0,255,0,0
B.3.31. AT+PASS=$string
Response
Remote Configuration Enabled
Function
Enter the password used in Remote Settings mode
Parameter
$string= Password (Default=”0000”)
Description
Enter the password for authentication in Remote Settings mode
Example
AT+PASS=1234
B.3.32. AT+CHPASS=$string
Response
 OK
Function
Enter the password for authentication in Remote Settings mode
Parameter
$string= New password
Description
Change the password used in Remote Settings mode. The password can be set up to 8
digits.
Example
AT+CHPASS=12345678
B.3.33. AT&V
Response
 S0:m0;S1:m1; …Sn:mn
 OK