WCS-232_v6.0_User Manual_Eng_DM v1.0.1

WCS-232 v6.0 User Manual
52
Response
 OK
Function
Set authentication and data encryption
Parameter
Authentication=0: Inactivate (Default)
Authentication=1: Activate
Encryption=0: Inactivate (Default)
Encryption=1: Activate
Description
Determine whether to use security feature when connecting. Bluetooth authentication is to
determine whether to connect by referring to a link key that identifies each other at the time
of connection. Encryption is to protect data by encrypting wireless data transmitted and
received between Bluetooth devices. WCS-232 is designed to automatically handle
complex Bluetooth authentication and encryption, so user should only choose whether to
use authentication and encryption. Bluetooth encryption cannot be selected separately and
it is only valid when using Bluetooth authentication at the same time.
B.3.28. AT+BTNAME=$string
Response
 OK
Function
Change device name
Parameter
$string= New device name (Default=”WCSv2.0.0-445566”)
Description
Give WCS-232 a device name which is easy for users to identify. This device name is
useful for searching for Bluetooth devices on other Bluetooth devices. Name can be up to
30 characters in combination of alphabet and number.
Example
AT+BTNAME=”My-WCS-232”
B.3.29. AT+BTLPM,n
Response
 OK
Function
Set low power mode type and usage status
Parameter
n1=0: Disable Low power (Default)
n1=1: Enable Low power
Description
Sets whether to enable low power mode.
B.3.30. AT+BTRSSI,n (In single connection mode only)