WCS-232_v6.0_User Manual_Eng_DM v1.0.1

WCS-232 v6.0 User Manual
51
B.3.24. AT+BTSD? 
Response
 112233445566
 OK
Function
Outputs a list of devices sharing authentication key
Description
Shows a list of addresses of Bluetooth devices that share authentication keys with WCS-
232. The authentication keys for the Bluetooth devices listed are stored and managed
inside the WCS-232 and can store up to seven keys.
B.3.25. AT+BTCSD
Response
 OK
Function
Delete the list of authentication keys (Link key) sharing devices
Description
Delete the list of Bluetooth devices that share the authentication key. This command
deletes the content stored in flash memory. As the list is still stored in main memory, it
becomes effective after a software reset or power off and on.
B.3.26. AT+BTFP,n
Response
 OK
Function
Create the authentication key each time
Parameter
n=0: Inactivate (Default)
n=1: Activate
Description
If authentication is enabled, create and save authentication keys based on stored
passwords. On subsequent connections, the stored authentication key will go through the
authentication process, which is used to increase the security level by regenerating the
authentication key each time of connection.
n=0: Disables this function.
n=1: Enables this feature.
B.3.27. AT+BTSEC,Authentication,Encryption