WCS-232_v6.0_User Manual_Eng_DM v1.0.1

WCS-232 v6.0 User Manual
45
B.3.11. AT+BTMODE,n
Response
 OK
Function
Set operation mode
Parameter
n=0: MODE0 (Default)
n=1: MODE1
n=2: MODE2
n=3: MODE3
Description
To take effect after setting operating mode, you must reset software or turn the power off
and on. If you switch the mode in Pending state, first switch to Standby status with
AT+BTCANCEL command and then switch the mode.
Example
AT+BTMODE,2
 OK
ATZ
B.3.12. AT+MULTI,n
Response
(If n=0)
 OK
(If n=1 or n=2)
 TASK1 OK
TASK2 OK
TASK3 OK
TASK4 OK
Function
Change multi connection mode
Parameter
n=0: Single Connection Mode (Default)
n=1: Multi-Drop Mode
n=2: Node Switching Mode
Description
Change the settings between the default single connection mode, Multi-Drop mode and
Noe Switching mode.
B.3.13. +++
Response
 OK
Function
Switch the operating status from online to command waiting status
Description
When in online status, all data received from the host is sent to the counterpart Bluetooth