WCS-232_v6.0_User Manual_Eng_DM v1.0.1

WCS-232 v6.0 User Manual
44
Description
Search peripheral Bluetooth devices and displays their BD address, name and class
information of devices. Only Bluetooth devices which are in standby will be detected.
Up to 15 peripheral Bluetooth devices will be searched for approximately 30 seconds, and
‘OK’ response message will be output when the search is complete. The default value is
15, and stored in S-Register no.24.
Not available in Remote mode.
B.3.8. AT+BTLAST?
Response
 112233445566
Function
Display the address of the most recently connected Bluetooth device
Description
Used to refer to the address of the most recently connected Bluetooth device.
B.3.9. AT+BTVER?
Response
 WCS-232v2.0.0
 OK
Function
Show firmware version
Description
Show firmware version.
B.3.10. AT+MLIST?
Response
 CURRENT MODE:SINGLE CONNECTION MODE
 OK
Function
Display the current multi connection mode and connected slave addresses
Description
Displays the current multi connection mode(SINGLE CONNECTION MODE, MULTI-DROP
MODE, NODE SWITCHING MODE) and address of connected slave
Example
AT+MLIST?
CURRENT MODE: MULTI-DROP MODE
TASK1 – 000195000001
TASK2 – DISCONNECT
TASK3 – DISCONNECT
TASK4 – 000195000004