WCS-232_v6.0_User Manual_Eng_DM v1.0.1

WCS-232 v6.0 User Manual
20
8. Slave2 connected
Mode 1
Connect LED
flashes every 1
second
MODE LED
turns on
Slave2 connected
Mode 2
Connect LED
flashes every 1
second
9. Press the pairing button for
more than 2 seconds
Mode 3
Mode LED flashes
every 1 second
10. Press the pairing button for
more than 2 seconds
Mode 1
Mode LED flashes
every 1 second
11. Slave3 connected
Mode 1
Connect LED
flashes every 1
second
MODE LED
turns on
Slave3 connected
Mode 2
Connect LED
flashes every 1
second
12. Press the pairing button for
more than 2 seconds
Mode 3
Mode LED flashes
every 1 second
13. Press the pairing button for
more than 2 seconds
Mode 1
Mode LED flashes
every 1 second
14. Slave4 connected
Mode 1
Connect LED
flashes every 1
second
MODE LED turns
on
Slave4 connected
Mode 2
Connect LED
flashes every 1
second
Table 0-8 Multi-connection process using pairing button
*Note: During master’s attempt to connect to the slave after switching to multi connection mode, master’s Mode LED
turns off so it can be seen as single connection mode.