WCS-232_v6.0_User Manual_Eng_DM v1.0.1

WCS-232 v6.0 User Manual
19
slave1. Once connected to slave1, the Connect LED on the master flashes every 1 second.
Step5. To connect to slave2, press the pairing button of the master for more than 2 seconds to change to Mode 3.
The Mode LED flashes green 3 times every 3 seconds.
Step6. Press the pairing button of the master again for more than 2 seconds to search and connect slave2. Once
connected to slave2, the Connect LED on the master flashes every 1 second. Now the master and the slave1,
slave2 are connected.
Step7. To connect to slave3, press the pairing button of the master for more than 2 seconds to change to Mode 3.
Mode LED flashes green 3 times every 3 seconds.
Step8. Press the pairing button of the master again for more than 2 seconds to search and connect slave3. Once
connected to slave3, the Connect LED on the master flashes every 1 second. Now the master and the slave1,
slave2, slave3 are connected.
Step9. To connect to the last slave4, press the pairing button of the master for more than 2 seconds to change to
Mode 3. Mode LED flashes green 3 times every 3 seconds.
Step10. Press the pairing button of the master again for more than 2 seconds to search and connect slave4. Once
connected to slave4, the Connect LDE on the master flashes every 1 second. Now the master and the slave1,
slave2, slave3, slave4 are all connected.
Step11. If all four slave connections are made and the power is turned off and on, it will automatically reconnect and
operate in Multi-Drop mode.
Master
Status
LED
Slave
Status
LED
1. Press the reset button for
more than 2 seconds
Mode 0
Mode LED turns on
Press the reset button of
slave1,2,3,4 for more than 2
seconds
Mode 0
Mode LED turns on
2. Press the pairing button of
slave1,2,3,4
Mode 3
Mode LED flashes 3
times every 3
seconds
3. Press the pairing button for
more than 2 seconds
Mode 3
Mode LED flashes
3 times every 3
seconds
4. Press the pairing button for
more than 2 seconds
Mode 1
Mode LED flashes
every 1 second
5. Slave1 connected
Mode 1
Connect LED
flashes every 1
second
Slave1 connected
Mode 2
Connect LED
flashes every 1
second
6. Press the pairing button for
more than 2 seconds
Mode 3
Mode LED flashes
every 1 second
7. Press the pairing button for
more than 2 seconds
Mode 1
Mode LED flashes
every 1 second