WCS-232_v6.0_User Manual_Eng_DM v1.0.1

WCS-232 v6.0 User Manual
14
Similar to Mode 2, but it allows connections to all Bluetooth devices other than Bluetooth
device with specific DB address. It can be searched and connected to other Bluetooth devices.
General Bluetooth device is usually in Mode 3 status.
Table 0-1 WCS-232 operation mode
3.2 LED
RS232-Tx, RS232-Rx flashes when data is transmitted. For small data, it may be hard to recognize the quick flashing.
Mode
Mode LED
Connect LED
Mode 0
Green ┏━━━━━
Mode 1
Green (Every 1 second) ┏┓
Mode 2
Green (Every 3 seconds) ┏┰┓
Mode 3
Green (Every 3 seconds) ┏┰┰┓
Connection (Single)
Green (Every 1 second) ┏┓
Connection (Multi)
Green ┏━━━━━
Green (Every 1 second) ┏┓
Table 0-2 The WCS-232 LED Indicators
3.3 Serial Port
The following are the serial port settings that can be selected from WCS-232. WCS-232 cannot be set with a setting
which is not in the table.
Serial Port Settings
Values
Baud rate
1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200, 230400, 460800,
921600
Data bite
8
Parity
No parity, Even parity, Odd parity
Stop bit
1, 2
Hardware Flow Control
Use, No Use
Table 0-3 WCS-232 serial setup