User's Guide

uLory User Guide

6.1 Switch Setting Table

NUMBER STATUS DESCRIPTION

ON Setup Mode

OFF Operation Mode (Default)

2 - Not used

6.2 Operation Mode Setting

There are two Modes for uLory: General Communication Mode and LoryNet Mode. General

Communication Mode is for the communication between PC and a device via uLory while

LoryNet Mode is used for the communication in a structure of LoryNet Packet.

Setup via command

Set and open USB Serial Port which was originally created on PCs using the terminal program as

belows:

Baud Rate: 9600

Data Bit: 8

Stop Bit: 1

Parity Bit: None

Switch on (Switch 1) to change to the Setup Mode

Change to the Setup Mode via AT Command and then, LED will blink fast during the process of