User's Guide

tLory User Guide
9
5. How to Connect
A device such as SLory or uLory is required to receive the information on temperature and
humidity transmitted from tLory.
Users should connect sLory or uLory to PCs and use LoryView to check the data on
temperature and humidity from tLory.
6. How to Use
Setting channel, Spreading Factor and power (output) of tLory is required to communicate
with other devices in LoryNet via Dip Switch or LoryView.
The default sensing period of tLory is 1 hour and can be changed through LoryView
(*Time error may occur depending on the user environment such as temperature and
humidity.)
6.1 Switch and Button Setting Table
Setting Spreading Factor (DIP Switch 2)
FEATURE SWITCH Spreading Factor
Changing
Spreading Factor
ON 10
OFF 9
Switching Channel (DIP Switch 3~6)
FEATURE DIP SW 3 DIP SW 4 DIP SW 5 DIP SW 6 CHANNEL
Switching ON ON ON OFF 1=917.3MHz