User's Guide

tLory User Guide
16
94 2 Reserved R - Reserved space
96 3
Ent3
SID R 0~0xffffff Device number of another user
99 1 DTN R 0~0xff Table number of another user
100 1 Dent R 0~0xff Table entry address of another user
101 1 Size R 0~0xff Size of changed entry
102 2 Reserved - - Reserved space
104 3
Ent4
SID R 0~0xffffff Device number of another user
107 1 DTN R 0~0xff Table number of another user
108 1 Dent R 0~0xff Table entry address of another user
109 1 Size R 0~0xff Size of changed entry
110 2 Reserved - - Reserved space
112 1
Usage rates of FIFO input
R 0~100 Usage rates of FIFO input (%)
113 1
Usage rates of FIFO
output
R 0~100 Usage rates of FIFO input (%)
114 1 Over_Cnt R 0~255 Number of FIFO overrun
115 2 Tx Cnt, R 0~0xffff Number of rocket transmission
117 2 Rx Cnt, R 0~0xffff Number of rocket reception
119 1 Init R 1
Entries indicating the initialization of each
layer
Bit 0: Application layer
Bit 1: Table layer
Bit 2 : Route layer
Bit 4: Link layer
The bit 0 indicates that it is not initialized
while the bit 1 means the completion of
initialization. (The default value is 0x00 after
the activation)
127 1 Ack R 1 Indicate the reception of Ack if it is not 0
128 1 Save R/W 1byte Save table value in Flash
129 1 Restart R/W 1byte Restart the device
130 8 FW Update R/W 8Byte
It is set in case of request for updates from
PC. The table entry number and update
information of ACK that PC will receive
during the update are recorded in the area
138 4 SW DATE R unsigned value YYYY (uint16_t) + M(uint8_t) + D(uint8_t)