Bluetooth USB Adapter TALUS User Guide Revision 0.
User Guide for the TALUS Revision 1.0.1 Firmware version 1.0.X Printed in Korea Copyright Copyright 2008, SystemBase Co., Ltd. All rights reserved. SystemBase Co., Ltd. reserves the right to make changes and improvements to its product without providing notice. Trademark SystemBase is a trademark of Systembase Co., Ltd. Windows® is a registered trademark of Microsoft Corporation. Ethernet® is a registered trademark of XEROX Corporation.
Contents 1. Introduction 4 1.1. Overview ....................................................................................................................................4 1.2. Package Check List....................................................................................................................4 1.3. Product Specification..................................................................................................................4 2. Installing the Bluetooth Software Appendix A.
1. Introduction 1.1. Overview Thank you for purchasing TALUS. TALUS is a Bluetooth-USB adapter with replaceable external antenna. TALUS supports Bluetooth 2.0+EDR class 1 with working distance up to 100 meters. In addition, working distance can be further extended using optional dipole or patch antennas. TALUS supports USB 2.0 for the computer interface and can be used with Windows using Bluetooth stack driver included in the CD or MAC OS X using MAC OS X Bluetooth stack driver. 1.2.
2. Installing the Bluetooth Software This chapter describes how to install and set up the Bluetooth software on your computer when you plug the TALUS to your computer for the first time. Before connecting the TALUS, you must install the Bluetooth software. You should uninstall any kind of Bluetooth driver or utility, Such as Widcomm BTW or Toshiba. a. Insert the installation software CD. b. Click on “Install Bluetooth Utility / Driver” c. The InstallSheld wizard is started. Click the Next button.
d. Read the License and click the “I accept the terms in the license agreement” radio button. Then click the Next button. Figure 2.2: License Agreement e. Click the Install button to begin the installation. Figure 2.
f. During installation, you should plug in the Parani-UD100 to USB port. After plugging in it, click the OK button. Figure 2.4: Plug in the Bluetooth device g. Installation is completed. Click the Finish button. Figure 2.5: InstallShield wizard complete h. Click the Yes button to restart your PC. Figure 2.
3. Approval Information 3.1 FCC 3.1.1 FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, Including interference that may cause undesired operation Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules.
Appendix A.
Appendix B. Warranty D.1. GENERAL WARRANTY POLICY Sena Technologies, Inc. (hereinafter referred to as SENA) warrants that the Product shall conform to and perform in accordance with published technical specifications and the accompanying written materials, and shall be free of defects in materials and workmanship, for the period of time herein indicated, such warranty period commencing upon receipt of the Product.
- Replacement of parts due to normal wear and tear, - Hardware has been altered in any way, - Product that has been exposed to repair attempts by a third party without SENA’s written consent, - Hardware hosting modified SENA Software, or non-SENA Software, unless modifications have been approved by SENA. - Battery component capacity degradation due to usage, aging, and with some chemistry, lack of maintenance. D.4.
