sWiFi_all_UserManual_Eng_DM v1.1.1

sWiFi/all User Manual

2.4GHz Bandwidth

Use 2.4GHz bandwidth and supports maximum speed of

600Mbps.

Channel

Auto(2.4G)

Set the channel of sWiFi/all.

*Channel values may vary by country.

Roaming

Activate/Deactivate the automatic roaming function.

0 deactivates.

If you give RSSI value between -100 and -1dbm, it performs

automatic roaming if sensitivity become less than that RSSI.

Algorithm

TKIP

Encryption Algorithm

TKIP(Temporal key Integrity Protocol)

Basic encryption algorithm used on WPA.

CCMP(AES) (Counter Cipher Mode with block chaining

message authentication code Protocol (Advanced Encryption

Standard))

AES(Advanced Encryption Standard)-based encryption algorithm

with increased security.

EAP type

TLS

TLS is an IETF disclosure standard defined in RFC5216. It is

considered the safest of the EAP standards and commonly used.

An authentication certificate is required on both Server and Client.

TTLS

TTLS secures TLS and performs cross certification of Client and

network through encrypted channels on the server. TTLS only

requires Server side certificate.

PEAP

Transfers authentication data using tunneling between the

authentication Server and PEAP Client. Only Server side

certificate is required as same as TTLS.

This setting is displayed when Security is Enterprise.

EAP ID

EAP Authentication ID

This setting is displayed when Security is Enterprise.

EAP PW

EAP Authentication Password

This setting is displayed when Security is Enterprise.

EAP Anonymous ID

This setting is displayed when Security is Enterprise.