sWiFi_all_UserManual_Eng_DM v1.1.1

sWiFi/all User Manual
29
In Soft-AP mode, encryption mode can be chosen between open,
WSA-PSK.
Security Key
-
Enter the password of a AP to access.
Connection Type
Infrastructure
Set the connection type of sWiFi/all.
Infrastructure
The mode that intermediate AP performs a sWiFi/all connection
and exchanges data. When selecting this type, the AP Scan
Button menu appears.
Soft AP
The mode that sWiFi/all performs AP functions.
Without the AP, the computer or other sWiFi/all is connected to
the operating sWiFi/all to communicate. At this time, please select
Static IP for the sWiFi/all you want to connect and use it as the
static IP in the same band.
Target AP Name(SSID)
-
Designate the AP name of the target.
If you select AP with [AP Scan] button, the AP name is
automatically displayed.
Target AP MAC Address
-
Designate the MAC Address of the target AP.
If you select AP with [AP Scan] button, the AP name is
automatically displayed.
Country
KR
Note the country code for sWiFi/all/
*Channel values may vary by country.
Mode
802.11 a/b/g/n
Set 802.11 protocol(a/b/g/n).
802.11 a
5GHz Bandwidth
Uses OFDM technology and supports transmission speed up to
54Mbps. Easily affected by the surrounding environment such as
obstacles or urban buildings due to the signal characteristic.
802.11 b
2.4GHz Bandwidth
The highest transmission speed is 11Mbps, but during
implementation of CSMA/CA technology, it shows efficiency of 6-
7Mbps.
802.11 g
2.4GHz Bandwidth
The transmission speed is as same as 802.11 a and the only
difference is that it uses 2.4GHz bandwidth frequency. It is easily
compatible with the commonly used 802.11 b and is now widely
used.
802.11 n