sWiFi_all_UserManual_Eng_DM v1.1.1

sWiFi/all User Manual
28
4. Setup Utility
The main menus of Network Setup are as follows.
Menu
Default
Description
IP Type choice
Static IP
Select the IP type to set for device.
Static IP is fixed IP and DHCP is the automatic IP mode assigned
from the AP.
Device Name
sWiFi_all
Set the device name.
Device IP Address
192.168.0.223
Set the Static IP address of the device.
(If the connection type is Static IP, enter the IP address. If DHCP,
it cannot be changed)
Subnet mask
255.255.255.0
Set the subnet mask address of the device.
(If the connection type is Static IP, enter the subnet mask. If
DHCP, it cannot be changed)
Gateway
192.168.0.254
Set the Gateway address of the device.
(If the connection type is Static IP, enter the gateway address. If
DHCP, it cannot be changed)
DNS
168.126.63.1
Set the IP address of the server that provides DNS (Domain
Name Service).
Security
open
Enable encryption mode.
open
Disable encryption mode.
WEP
An encryption method that uses RC4 algorithm, using
40bit(5Byte), 104bit(13Byte) keys.
WPA-PSK
Basically uses TKIP algorithm but CCMP algorithm is also
enabled. At least 8Byte key is required.
WPA2-PSK
Use AES algorithm. Requires key over 8Byte.
WPA-Enterprise
Encryption mode that blocks unauthorized devices from
accessing the network and allows only authorized devices.
Uses EAP (Extensible Authentication Protocol).
WPA2-Enterprise
WPA-Enterprise supports CCMP by default instead of TKIP.
Shaded in Infrastructure mode as it is accessed with the
information of AP to access.