sWiFi_all_UserManual_Eng_DM v1.1.1

sWiFi/all User Manual
20
Example of Using Setup Method
Based on the above information, we explained the information that can be easily set up through various connections.
Please understand the setup method with an example of the configuration below.
Infrastructure #1
Setup
PC Connected LAN
( or PC Connected WiFi )
sWiFi/all-1 (or sWiFi/all-2)
Network
Device IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
DNS:168.126.63.1
Connection Type: Infrastructure
Target AP Name: sysbas23
(If you select AP with [AP Scan] button,
the AP name is automatically displayed.)
Device Name: sWiFi/all_1
Device IP Address: 192.168.0.200
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
DNS:168.126.63.1
Connection Type: Infrastructure
Target AP Name: sysbas23
(If you select AP with [AP Scan] button, the AP
name is automatically displayed.)
Serial
Use COM Redirector to connect to the
COMx port (192.168.0.200 4001)
Operation Mode: COM Redirector
Local Port: 4001
TCP Server
Local Port: 4001
Operation Mode: TCP Client
Target IP: 192.168.0.100
Target Port: 4001
Operation Mode: TCP Client
Target IP: 192.168.0.200
Target Port: 4001
Operation Mode: TCP Server
Local Port: 4001
Operation Mode: UDP
Local Port: 4001
Target IP: 192.168.0.200
Target Port: 4001
Operation Mode: UDP
Local Port: 4001
Target IP: 192.168.0.100
Target Port: 4001