sWiFi_all_UserManual_Eng_DM v1.1.1

sWiFi/all User Manual

Reboot

After setting up sWiFi/all, press the '[Reboot] button to restart sWiFi/all and change it to operating mode.

Click [Reboot] Reboot succeeded

WebPage

The WebPage is used to register for WPA-Enterprise, WPA2-Enterprise among the encryption modes of sWiFi/all or

to update firmware(wireless).

There are three WebPage access methods as below.

- sWiFi/all is in setup mode, sWiFi/all and PC are connected via WiFi  Access Web using the default IP 10.10.1.1

- sWiFi/all is in Infrastructure mode, connected to AP  Access Web using IP of sWiFi/all on the connected PC

- sWiFi/all is in Soft AP mode  Access Web using the set IP of sWiFi/all on the connected PC

The figure below is the first method of the above to be Web-connected to the default web address of the device,

http://10.10.1.1.

You can upload CA, Client, and Key files for Enterprise encryption.