sWiFi_all_UserManual_Eng_DM v1.1.1

sWiFi/all User Manual
17
Serial Setting
Serial Setup perform sWiFi/all settings related to serial port.
[Load] button is a button that shows the information of the currently set sWiFi/all.
[Save] button is a button that saves the set content of sWiFi/all.
Once the settings have been change, please make sure to press the [Save] button and check that the changed
values have been applied in the actual equipment. You can check the [Load] button to re-connect and check the set
value again. If force terminate the program without saving the changes, the changed values are not saved.
*For detailed network setup information, please refer to Ch.4 Setup Utility section in the following Appendix.