sWiFi_all_UserManual_Eng_DM v1.1.1

sWiFi/all User Manual
10
Device/PC – Device Connection (Soft-AP)
Without being connected to AP, sWiFi/all and PC can be connected 1:1 For serial communication.
Between two equipment communicates through serial port, with sWiFi/all attached to each end and connected 1:1,
wireless communication is available.
To perform the sWiFi/all connection and communication, select the operating mode of one sWiFi/all with Soft-AP
which operates as AP and the other with Infrastructure so the AP operates as Soft-AP.
At this point, set to either TCP Server on one side and TCP Client on the other, or UDP on both sides to connect
serial socket and communicate. The Soft AP mode of sWiFi/all supports one WiFi connection.
*For detailed setup methods for each connection, please refer to the “Example of Using Setup Method” in
Ch.7 Settings.