SG-1160_SpecSheet_Eng_DM v1.0.1

SystemBase Co., Ltd.
16F, Daerung Post Tower-1, Digital-ro 288, Guro-gu, Seoul, Republic of Korea 08390
Tel [phone] | Fax [phone] | www.sysbas.com
Specifications are subject to change without notice.
Overview
SG-1160/ALL is a device server that easily allows serial COM ports to be placed at the point of need, anywhere on
the network. It has two serial ports and 10/100 LAN port and supports RS232/422/485 at speeds up to 921.6Kbps.
The SG-1160/ALL operates with TCP/IP socket communications or Windows applications using our COM port
redirection software to communicate transparently with network-attached devices, just as if they were directly
connected. Your application does not require customization. The SerialGate family of device servers are ideal for
POS, factory automation and building automation applications.
Specification
Network
Protocol
TCP, UDP, Telet, ICMP, DHCP, TFTP, HTTP, SNMP, SSH, SSL
LAN
2 ports 10/100 Mbps RJ-45 (WAN, LAN)
IP Address Assignment
Static IP, DHCP
Serial
Number of Ports
16 Serial ports
Interface
RS232/RS422/RS485: RJ-45
Maximum Speed
921.6Kbps
Signal Lines
RS232: TXD, RXD, DTR, DSR, RTS, CTS, DCD, GND
RS422: TXD+, TXD-, RXD+, RXD-
RS485: TRXD+, TRXD-
Data Bits
5, 6, 7, 8
Stop Bits
1, 2
Parity Bits
None, Even, Odd
Flow Control
RTS/CTS, XON/XOFF
Hardware &
Environment
Processor
ARM926EJ-S(400MHz)
Flash Memory
8MB
RAM
32MB
LED
TX, RX, Power, WAN(Link/ACT, 100M), LAN(Link/ACT, 100M),
RDY(Ready), LCD
Power Requirement
100 ~ 220V AC, Power Consumption 2.5W
Dimensions (W x L x H)
430 x 180.8 x 44mm
16.9 x 7.1 x 1.73in