User Manual

SerialGate User Guide
63
In order to read and write attributes change the feature to
"ReadWrite.”
(Options : ReadOnly/ ReadWrite)
def v3readwrite
[enable, disable]
Disable
SNMP V3 Attributes can read and write by SNMP Agent.
In order to read attributes only change the feature to
"ReadOnly.”
In order to read and write attributes change the feature to
"ReadWrite.”
(Options : ReadOnly/ ReadWrite)
def v3username
[string]
serialgate Configure the Username to use SNMP V3.
def v3password
[string]
none Configure the password to use SNMP V3.
def trapip
[address]
0.0.0.0
Configure the server IP address which transmits the TRAP
information.
def trapoprt
[Socket No.]
162
Configure the server Port which transmits the TRAP
information.
def trap_reset
[enable, disable]
Enable If Enable is selected, inform the "System reset info".
def trap_connect
[enable, disable]
Disable If Enable is selected, inform the "Serial Port opened info".
def
trap_disconnect
[enable, disable]
Disable If Enable is selected, inform the "Serial Port Closed info".
Serial Commands
You can set the communication and operation environment for serial port. Please refer to Chapter 5 for
details of each option.
Commands Default Description
def port x protocol
[disable,
com_redirect,
tcp_server,
Tcp_client,
com Select the operation protocol to be used in serial port.