User Manual

SerialGate User Guide
61
View Commands
Commands related to View are as follows.
Command Description
def view Show all information about SerialGate
def view wan Show WAN network settings
def view management Show managing items settings
def view serial Show serial port settings
def help Show command list and help
Network Commands
Commands related to configuration of general network environment and network management are as
follows.
Command Default Description
def mac
<Mac Address>
00:05:f4:00:20:57 Register SerialGate’s MAC address
def line
[ip/dhcp]
Static IP IP obtaining method for SerialGate’s network connection
def ip
<IP Address>
192.168.0.223
Display the current IP address
If line type is Static IP, manually enter an appropriate IP
address.
If line type is DHCP, it is not editable. Instead, current IP
address is shown.
def mask
<Subnet mask>
255.255.255.0
Display the current subnet mask address
If line type is Static IP, manually enter an appropriate
subnet mask address.
If line type is DHCP, it is not editable. Instead, current
subnet mask address is shown
def gateway
<Gateway
address>
192.168.0.1
Display the current Gateway address
If line type is Static IP, manually enter an appropriate
Gateway address.