User Manual

SerialGate User Guide
50
Menu Default Description
Wireless Network Disable
When enabled, WiFi is available.
•Disable: WiFi is not available.
•Enable: WiFi is available.
Wireless Mode
Infrastructure
Set the wireless LAN mode.
(Option: Infrastructure, Ad-Hoc)
•Infrastructure : Use WiFi under the Infrastructure
mode. This mode is used for connecting to the wireless
AP (Access Point) as a client to connect to other
network.
•Ad-Hoc : Use WiFi under the Ad-hoc mode. This mode
is used for 1:1 communication with another Ad-hoc
client.
Wireless Network
Name
(SSID)
none
Sets the identification (SSID) of a wireless network to be
connected.
(Case sensitive & Up to 32 bytes using alphabets and
numbers) SSID should be same for all devices on the
same wireless network.
Channel
Auto
Selects a frequency channel for wireless connection.
(Option: Auto, 1 ~ 13)
•Auto: Connect a channel specified in AP automatically.
In most cases, this setting is used.
•Value Specification: Specify a channel to be connected
manually.
Bitrate
Auto
Sets the speed for wireless connection.
(Option: Auto, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48,
54Mbps)
Auto setting adjusts the speed depending on signal
sensitivity and noise. In most cases, this setting is used.
If Wireless Network mode is set to 802.11b/g Mixed, all
options can be selected.
802.11b only allows setting as 1, 2, 5.5 and 11Mbps.
802.11g only allows setting as 6, 9, 12, 18, 24, 36, 48
and 54Mbps.