User Manual

SerialGate User Guide
34
If SerialGate’s WAN port uses assigned IP address from DHCP server or is set to a fixed IP address,
SerialGate supports the following options in case that a user does not know IP address.
For SerialGate-1010/1020, SerialGate-1010(W)/ALL, SerialGate-1020(W)/All
1. A user can connect to SerialGate LAN port’s virtual IP address; “10.10.1.1”
2. A user can search IP address pre-set to SerialGate using “Detector” application enclosed in Utility &
Documents CD and connect to SerialGate.
For SerialGate-1040/1080/1160
1. A user can connect to SerialGate LAN port’s default IP address; “10.10.1.1”.
2. Connecting a serial console port to a PC’s serial port, a user can set 115,200bps and connect to a
SerialGate.
3. A user can search IP address pre-set to SerialGate using “Detector” application enclosed in Utility &
Documents CD and connect to SerialGate.
WAN Default IP address: 192.168.0.223
SerialGate’s default IP address is set to 192.168.0.223. In order to
connect with this address, you need to change network configurations
so that your PC can connect to the IP 192.168.0.223. Please refer to
an example below, and note that values don’t necessarily have to be
identical to the example below.
LAN Sub IP address: 10.10.1.1
For SerialGate-1010/1020, LAN port’s virtual IP address is 10.10.1.1
while LAN port’s default IP address for SeroalGate-1040/1080/1160 is
10.10.1.1. In order to connect with this address, you need to change
network configurations so that your PC can connect to the IP
10.10.1.1. Please refer to an example below, and note that values
don’t necessarily have to be identical to the example below.