User Manual

SerialGate User Guide
28
SerialGate-1160 Exterior
 Serial: RJ-45 socket for serial ports (RS232, 422,485). A user can select protocol in web
browser.
 Power connector: for connection of 100 ~ 245 VAC cable
 Reset: SerialGate reboots if this button is pressed for less than 3 seconds. If pressed for
longer than 3 seconds, SerialGate will restore factory default settings.
 LED: Operation status of SerialGate. Next section describes the meaning of each LED
display status.
 WAN: Main network port used when connecting SerialGate to networking devices such
as Ethernet card, hub, and router.
 LAN: Sub-network port used as DHCP Server. Assigns IP address to a device connected to
sub-network.