User Manual

SerialGate User Guide
26
DC Version : for connection of DC12V adapter cable
and for connection of terminal block power cable
 Reset: SerialGate reboots if this button is pressed for less than 3 seconds. If pressed for
longer than 3 seconds, SerialGate will restore factory default settings.
 LED: Operation status of SerialGate. Next section describes the meaning of each LED
display status.
 WAN: Main network port used when connecting SerialGate to networking devices such
as Ethernet card, hub, and router.
 LAN: Sub-network port used as DHCP Server. Assigns IP address to a device connected to
sub-network.
 SD / MMC: SD memory card works for system log. Available up to 32 Gbytes. (SD memory
not included in the package)
SerialGate-1040/1080 LED / RESET
<LED Feature>
LED Status Meaning
PWR
(R
ED)
On
Power supplied to the device
Off
No power supplied to the device
RDY
(Green)
Blink
Normal operation
On
System Booting
Off
System Error
WAN
(Green)
Off
Deactivate main network
On
Activate main network
LAN
(Green)
Off
Deactivate sub network
On
Activate sub network
Serial Tx/Rx
(Green/Orange)
Blink
Serial data transmitted
Blink
Serial data received
WAN/LAN On
100baseT connection detected & LAN data transf
erred