User Manual

SerialGate User Guide
23
SerialGate-1020 (Combo Version)
 Power connector: for connection of DC9~30V adapter cable
 Terminal block power connector: for connection of terminal block power cable
 Reset button: SerialGate reboots if this button is pressed for less than 3 seconds. If
pressed for longer than 3 seconds, SerialGate will restore its factory default settings.
 LED: Operation status of SerialGate. Next section describes the meaning of each LED
display status.
 LAN port: 8-pin RJ45 jack connects SerialGate to networking devices such as Ethernet
card, hub, and router.
 Serial: RJ-45 socket for serial ports (RS-232, or Combo(RS-422/RS-485))