sCAN_UserManual_Eng_DM_v1.2.1

sCAN User Manual
5
This is about the DIP-Switch back of the sCAN device.
ON
1 2 3 4
No.
Status
Description
Switch 1
ON
Activate a CAN VDD as power
OFF
Deactivate a CAN VDD as power (Default)
Switch 2
ON
Activate DE9 pin no. 9 as power
OFF
Deactivate DE9 pin no. 9 as power (Default)
Switch 3
ON
Active mode
OFF
Active mode (Default)
Switch 4
ON
Enable terminating resistance (125Ω)
OFF
Disable terminating resistance (Default)
1.3. About CANView
The commands are easily delivered via a COM port terminal but this provides the utility to upgrade, set and test the
firmware for user’s convenience.