Manualshelf

SB16C1058PCI_Data Sheet_EN

ManualsBrandsSystemBase ManualsElectronic ComponentsPCI to Octal UART with 256 Byte FIFO Bridge Controller - 60pcs Bundle
12345678910
SB16C1058PCI
PCI Target Interface Controller
with Octal-UART
JULY 2013 REV 1.04
8
5. Applications
5.1 Serial 8-port
Serial 8-port Card is generally made with SB16C1058PCI. Special logic is not needed
to make one serial port since octal-UART are built inside the SB16C1058PCI.
SB16C1058PCI is the best and cost effective one-chip solution for 8-port serial card
application. Users can make a serial application with RS232, RS422 or RS485
transceivers easily. Depending on Serial Interface, Transceiver IC of the RS232, RS422
or RS485 needs to be attached for long distance transmission. SB16C1058PCI is used
as a PC add-in card type in Figure 5–1
Figure 5–1: Serial 8-port Card Application Block Diagram
C
O
N
32-bit PCI Local Bus, 66/33MHz
SB16C1058PCI
8-port Serial
Signals
PCI Controller
SB16C1050 UART Core
SB16C1050 UART Core
SB16C1050 UART Core
SB16C1050 UART Core
SB16C1050 UART Core
SB16C1050 UART Core
SB16C1050 UART Core
SB16C1050 UART Core
Transceivers
RS232/422/485
8 Channel