Manualshelf

SB16C1054PCI_Data Sheet_EN

ManualsBrandsSystemBase ManualsElectronic ComponentsPCI to Quad UART with 256 Byte FIFO Bridge Controller - 60pcs Bundle
12345678910
SB16C1054PCI
PCI Target Interface Controller
with Quad-UART
JULY 2013 REV 1.04
8
5. Applications
5.1 Serial 4-port
Serial 4-port Card is generally made with SB16C1054PCI. Special logic is not needed
to make one serial port since quad-UART are built inside the SB16C1054PCI.
SB16C1054PCI is the best and cost effective one-chip solution for 4-port serial card
application. Users can make a serial application with RS232, RS422 or RS485
transceivers easily. Depending on Serial Interface, Transceiver IC of the RS232, RS422
or RS485 needs to be attached for long distance transmission. SB16C1054PCI is used
as a PC add-in card type in Figure 5–1
Figure 5–1: Serial 4-port Card Application Block Diagram
4-port Serial
Signals
PCI Controller
SB16C1050 UART Core
SB16C1050 UART Core
SB16C1050 UART Core
SB16C1050 UART Core
RS232/422/486
Transceivers
4 Channel
32-bit PCI Local Bus, 66/33MHz
C
O
N
SB16C1054PCI