Manualshelf

SB16C1052PCI_Data Sheet_EN

ManualsBrandsSystemBase ManualsElectronic ComponentsPCI to Dual UART with 256 Byte FIFO Bridge Controller - 90pcs Bundle
11121314151617181920
SB16C1052PCI
PCI Target Interface Controller
with Dual UART
JULY 2013 REV 1.06
15
Other Interfaces
Name
Pin
Type
Description
XIN
96
I
Crystal or External Clock Input: This input of up to 85MHz for data rate of
5.3Mbps at 3.3V.
XOUT
95
O
Crystal or Buffed Clock Output: This output level is 3.3V.
WAKE_REQ
107
I
WAKE Request: PM state of PCI Device goes from D3 state to D0 state with
the Wake Up Event. This pin receives the event signal needed for the
transition from D3 state to D0 state.
PME_S
106
O
PME Status: This signal indicates PM state. If PM state is in D0 state, it is set
to 1b and if PM state is in D3 state, it is cleared to 0b.
Power and Ground
Name
Pin
Type
Description
VCC
5, 16, 27, 37, 48, 59, 69, 80,
91, 101, 112, 123
PWR
Power Supply: Connect to +3.3V and to Core Ground through
0.1uF capacitors.
GND
6, 17, 20, 22, 28, 38, 49, 60,
70, 81, 92, 94, 102, 113,
119, 124
GND
Ground: Connect to ground.