User Manual

LoryPlug/CPU SDK Manual
23
To change your ID to No. 255, type:
myid=255 (Enter)
The ID of the LogPlug/CPU must be used within the range of 10000000 to 16000000.
To initialize the settings, type:
default (Enter)
Refer to Factory_CFG() function in main.c for initial values.
To turn on encryption function, type:
aes=1 (Enter)
The AES Key value is set to the Default value if you do not change it.
To change the AES Key value, type as below:
After entering AES Key 16 bytes, you must enter AESIV 16 bytes to change it successfully.