User Manual

Eddy User's Guide
88
AT&V
Response
 S0:m0;S1:m1; …Sn:mn
 OK
Purpose
Display all the S-registers
Description
All parameters are stored at S-register in flash memory. These values are sustained until
hardware reset.
Response
 S0:m0;S1:m1; …Sn:mn
 OK
ATSnn? 
Response
 value
 OK
Purpose
Display a given S-register
Parameters
nn= Address of S-register
Description
A specific S-register will be displayed.
ATSnn=mm
Response
 OK
Purpose
Change S-register value
Parameters
nn= Address of S-register
mm= New value of S-register
Description
Some S-registers are optimized for the overall performance and protected and cannot
be changed. When users try to change these S-registers, response is ‘ERROR’.
For details of S-register, refer Appendix. B.
Example
ATS10=0
Command Validity
AT Command
Operation Status
Standby
Pending
Connect
AT
○
○
ATZ
○
○
AT&F
○
○
AT+BINQ?
◎
ATD112233445566
◎
ATD
◎