User Manual

Eddy User's Guide
70
Chapter 7. apendix
7.1 Eddy-BT Operation
7.1.1 How to use Eddy-BT
Eddy-BT is an optional module that can be loaded and used with Eddy-CPU module.
The communication interface of Eddy-BT is RS-232 and connected with 4
th
serial port of Eddy-CPU module.
If you want to develop your own application using Eddy-BT, please refer to ‚Test_BlueTooth.c‛ in ‚FileSyste
m‛ source. Also, you can use the default applications (Com_Redirect, TCP_Server) without additional develop
ment.
The following diagram explains how to connect between Eddy-BT and Bluetooth device using Com-Redirect pr
ogram. (The default IP address of Eddy-DK is 192.168.0.223.)