User Manual

Eddy User's Guide
63
Chapter 6. Configuration via Telnet
6.1 Connection
Open your telnet client and enter Eddy’s IP address to connect. You need to enter appropriate username and
password to login. Please note that this username and password is used as authentication method for Web a
s well. This means if username or/and password has been modified from the telnet interface, modified values h
ave to be entered to connect to web, and vice versa.
◆ Factory default username : eddy
◆ Factory default password : 99999999
Connection via Telnet
[def] command - you can view or configure Eddy’s settings
[def help] command - you can see help for [def] command
After changing values, you can see modified values with [def view] commands. But be careful because these v
alues are not in effect unless you issue a [def save] command. Changes will be discarded if you do not save
current settings.
6.2 View commands
Commands related to View are as follows.
Commands
Descriptions
def view
Show all information about Eddy.
def view wan
Show WAN network settings.