User Manual

Eddy User's Guide
58
5.7 DIO Settings
Eddy-DK supports 16 Channel Digital inputs and outputs (DIO) by connecting with I2C interface. It is possible t
o switch GLCD or Digital IO port via 16 Channel DIO. After changing values, you need to click ‘Submit’ butt
on. Then you will see the same page with modified values. Please note that you have to ‘Save & Reboot’ i
n order to see these changes in effect. Changes will be discarded if you do not save current settings.
 Since Eddy-S4M doesn’t support DIO and LCD, DIO Settings doesn’t be supported.
Menu
Default
Descriptions
Device
Select
LCD
Set the purpose of the I2C 16 Bit I/O channel.
LCD: Set the G-LCD mode.
If you set to the LCD, you cannot use it for the DIO port.
DIO: Set the DIO 16 channel mode.
You can set input or out 16 channel as like the GPIO.
If you set to the DIO, you cannot use it for the G-LCD.